Overview
When an order ships from England, Scotland or Wales to a Northern Ireland (BT) postcode, Anchanto OMS adds the customs and business-classification details that carriers need under the Windsor Framework. You add your UKIMS and EORI numbers once in Account Settings. OMS then applies them to every eligible order and sets each order’s Consumer Type and Risk Status automatically. Orders on every other route stay unaffected.
- UKIMS (UK Internal Market Scheme): an HMRC authorisation for trusted traders moving goods into Northern Ireland. It allows the authorised business to declare eligible goods “not at risk” of moving on into the EU, so EU duty isn’t charged on them. Each UKIMS authorisation is linked to the holder’s EORI number.
- EORI (Economic Operators Registration and Identification): the reference HMRC uses to identify a business on customs declarations.
Prerequisites:
- Route: Your orders ship from an England, Scotland, or Wales origin to a Northern Ireland (BT) postcode.
- Identifiers: You have the UKIMS and EORI of the business named on the customs declaration for your GB→NI movements. This is usually your own business when you act as the importer of goods into Northern Ireland.
- EORI format: Moving goods from Great Britain into Northern Ireland usually needs an EORI starting with XI, in addition to your business’s GB EORI.
- Field length: UKIMS and EORI each accept up to 40 characters.
- Roles and permissions: Not covered in source, needs SME input.
Step-by-Step Instructions
Add UKIMS and EORI to your account
- Go to Anchanto OMS → Sign in → You’re signed in to your OMS account.
- Go to Account Settings → Company Information → Open the Company Information details → The UKIMS and EORI fields are shown.
- Go to the UKIMS field → Enter your UKIMS number → The field accepts up to 40 characters.
- Go to the EORI field → Enter your EORI number → The field accepts up to 40 characters.
- Go to the bottom of the panel → Click Save → Your UKIMS and EORI are saved. Any eligible GB→NI order that hasn’t yet reached Ready to Ship picks up the new values.
Create a GB→NI order
- Go to Orders → Create New Order → The Create New Order form opens.
- Go to Order Type (shown as Order Tag) → Select B2B or B2C → OMS sets the Consumer Type: B2B becomes Business, and B2C becomes Individual. Choose carefully, because Order Type can’t be changed after the order is created.
- Go to the shipping address → Enter a Northern Ireland address with a BT postcode → OMS identifies the order as GB→NI when the origin is in England, Scotland or Wales.
- Go to the Risk Status, UKIMS and EORI fields → Review the values → They’re filled automatically and shown read-only.
- Go to the end of the form → Create the order → The order is created with its compliance details applied.
View compliance details on an order
- Go to the Orders list → Open the order → Order Details opens.
- Go to Order Details → Risk Summary → Review Consumer Type and Risk Status → Both values are shown read-only.
- Go to Order Details → Shipping Carrier Details → Review UKIMS and EORI → Your account’s values are shown for GB→NI orders. Other orders show “-”.
- Go to any compliance field → Hover over the info icon or a truncated value → The field’s tooltip appears, or the full value is shown.
Change the shipping address on an order
- Go to Order Details → Edit the shipping address → The address becomes editable.
- Go to the address editor → Save the change → OMS shows “Successfully updated. Refresh the page to see the changes.”
- Go to your browser → Refresh the page → Order Details shows the updated address.
- Go to Risk Summary → Check the values → If the order has moved into or out of the GB→NI route, UKIMS, EORI and Risk Status are recalculated.
For OMS + WMS accounts, the new address is also sent to WMS.
Important Notes & Limitations
How OMS identifies a GB→NI order. OMS treats an order as GB→NI only when both of these are true:
- Origin: an England, Scotland or Wales postcode. Origins starting with BT, IM, JE or GY don’t qualify.
- Destination: the shipping postcode starts with BT (Northern Ireland). Case and spaces are ignored.
For every other order, UKIMS and EORI show “-”, Risk Status shows Not Applicable, and no UKIMS or EORI value is sent to any downstream system.
How Risk Status is set. Risk Status is calculated automatically and can’t be edited:
| Order condition | Risk Status |
|---|---|
| GB→NI, B2B, UKIMS set in Account Settings | Not At Risk |
| GB→NI, B2B, UKIMS not set | At Risk |
| GB→NI, B2C | Not Applicable |
| Not GB→NI | Not Applicable |
Read-only classification.
- Consumer Type and Risk Status are read-only. They can’t be overridden in the UI or through the API.
- An At Risk order continues to process normally. The carrier applies the full customs process to it.
- OMS calculates Risk Status from your configured UKIMS and the order classification. A Not At Risk status doesn’t independently verify your UKIMS authorisation or whether a shipment qualifies for customs treatment.
When values change or freeze.
- If you change UKIMS or EORI in Account Settings, orders that haven’t reached Ready to Ship (RTS) pick up the new values. Orders at or after RTS keep their original values.
- If the shipping address moves an order into or out of the GB→NI route, OMS recalculates UKIMS, EORI and Risk Status.
One set of identifiers per account.
| Capability | Supported |
|---|---|
| One UKIMS and one EORI per OMS account | Yes |
| The same values applied to every GB→NI order | Yes |
| Different UKIMS or EORI per order or per customer | No |
| Separate sender and receiver (importer) UKIMS and EORI | No |
| Risk Status based on the receiver’s UKIMS | No. It’s based only on your account’s UKIMS. |
When someone else is the importer.
- The sender and the importer of record can be different parties. For example, a Northern Ireland business customer may import the goods under its own UKIMS. In that case, agree with your carrier or customs agent which party’s identifiers go on the declaration.
- OMS still sends your account’s values. A B2B order is marked At Risk if no UKIMS is set in your account, even when the receiver holds its own UKIMS.
- Liability for the accuracy of a movement stays with the holder of the UKIMS authorisation that is used.
Anchanto WMS. For OMS + WMS accounts, UKIMS, EORI and Risk Status are sent to WMS for GB→NI orders only. When WMS creates the carrier shipment, OMS supplies the order-level customs data and WMS supplies the final packing data.
APIs. The same rules apply to orders created or updated through Open API and API3. For orders that aren’t GB→NI, UKIMS and EORI are returned as null.
Not supported.
- UKIMS, EORI, Consumer Type and Risk Status aren’t available in Bulk Upload or Order Reports.
- UKIMS and EORI aren’t automatically synced from OXM.
Other routes. Domestic and international workflows outside the GB→NI route are unchanged.
Troubleshooting & Common Errors
| If the system shows this error | Follow these steps to fix it |
|---|---|
| “UKIMS cannot exceed 40 characters.” | Shorten the UKIMS value to 40 characters or fewer, then click Save. |
| “EORI cannot exceed 40 characters.” | Shorten the EORI value to 40 characters or fewer, then click Save. |
| A B2B GB→NI order shows At Risk | Check that UKIMS is set in Account Settings → Company Information. |
| UKIMS and EORI show “-” on the order | Check the origin and destination postcodes. The order may not be GB→NI. |
| Risk Status can’t be edited | This is expected. Risk Status is calculated automatically. |
| Order Type can’t be changed | This is expected. Order Type is fixed when the order is created. |
| UKIMS was changed in Account Settings, but the order still shows the old value | The order has already reached Ready to Ship (RTS), so its values are fixed. |
| Order details look unchanged after an address update | Refresh the page. |
Still need help? Contact your Account Manager or Anchanto Care at help@anchanto.com, and include:
- Your OMS account or seller information
- The order number
- The Order Type and shipping postcode
- The carrier and carrier service
- A screenshot of the Risk Summary section
- A screenshot or the exact text of any error message
- Whether your account is connected to WMS
Comments
0 comments
Article is closed for comments.